Taurean Light Industrial Roller Doors

Specifications

Rugged, reliable and good looking

Taurean Light Industrial Roller Doors deliver the rugged reliability and security needed for commercial and industrial applications such as warehouses and factories.  Available in a range of sizes to suit openings up to 5100mm high and 5000mm wide, depending on conditions. 

The curtain provides a continuous flexible covering with low operating noise and high strength.  The direct chain drive doubles as a locking device when mounted on the wall cleat, while the bottom shoot bolts can be securely padlocked. 

All Stramit® Roller Doors for commercial applications can be supplied with optional motor drives and remote controls.



Series B Light Industrial Doors



1. Automation option 

Single or three-phase motors available on all Series B doors, with optional remote control button or keypad. 

2. Advanced technology
 

Precision engineered nylon drum wheel 

3. Planetary gearing option
 

For larger Series B doors, planetary gearing is available for ease of operation.



 

 


Series B Light Industrial 

Minimum dimensions (mm) (A = Opening height) 

A2200250028003100390046005100
B440455485495515550560
C270275295300310325330
D170180190195205225230
E485505515525545575585


Minimum sideroom for motor (mm) 

DriveATA motorMerlin motorSteel-Line motorGrifco motor*Chain drive*
F190205165290195
G8570605590

* If 'wind-locked' door Spacer Kit fitted, F and G will increase by 35mm.         

Wind loads

Before specifying, investigate prevailing wind direction and expected maximum velocities at site.  For areas subject to high wind conditions, or for very wide openings, roller doors shoud be fitted with wind-lock end-clips and wind-lock guides.  Wind-lock clips prevent the curtain disengaged from the guides under wind pressure. 

Installation

Install doors behind opening, attached to brickwork or steelwork as required.  Leave sufficient return on both sides to accommodate support brackets and guides with the necessary working clearances. 

Posts and piers should continue past the lintel height to provide fixing for the support brackets.  Series B doors are supported on brackets above the opening on each end and require sufficient headroom for door to roll up.  Values in the tables indicate the minimum space required.  If there is insufficient headroom at the site, the bottom of the curtain roll may infringe the opening. 

Top mounting face of the wall bracket should be set to table dimensions.  If more than 40mm above track top, bend sharp track top away at wall side to avoid possible damage to the nylon braiding.

 

Availability

Product Availability 

NSWACT TAS VIC SA WA QLD NT
NNYYYNNN

Y - Yes     N - No     S - Subject to project size

Alternatives